42 microns temporary fence panesl OD32mm*2.00mm panel size 2100mm*2400mm Mesh 60mm*150mm Diameter 4.00mm NZS3750
42 microns temporary fencing panels ,42 microns is standard thickness of hot dipped galvanized which was widely acceptance by australia and new zealand equal to 300gram/sqm zinc but due to recently there are lots of temp fencing hire or rental companies bloom in australia building industry lots of temporary fencing panels was hire buy 42 microns temporary obiviously will lead to a cashflow issue so more and more these companies revert to 14 microns temp fencing but again 42 microns temp fencing is good product costefficient products in all market even it is a little bit expensive than 14 microns .In theroy the 14 microns service life is 3 years so 42 microns 3 times ability of anti corrosion so let us say half 5 years
| 42 microns temporary fence technical data sheet |
| Dimensions |
2100mm(H)*2400mm(W) |
| Tubing |
OD 32mm*2.00mm thick |
| Mesh Spacing |
60mm*150mm |
| Infill mesh size |
1736mm*2336mm |
| V wire number |
36 *sticks wire *4.00mm |
| H wire number |
17 *sticks wire *4.00mm |
| Finished |
42 microns /300 gram/SQM |
| Weight of panels |
20.5kg-22.0kg |
| Service life |
Salt spray Testing Result Least 5 years |
| 40HC container |
560 unit if covered clamp and base |
| Packing |
Metal Pallet wrapped with plastic film |
| Productions Time |
All stocked |
| Ocean time |
25 days to 35 days to any port of AU & NZ |
| What papers you provided after shipping containers |
|
Main :Packing list , Commercial Invoice , bill of lading copy or draft for telex release one,balance papers
Plus
For NZ :Containers Declaration
For AU:PKD - Packing Declaration 2016 and Certificated of Original
|
